Enter the ZIP code where this system will be installed to see current utility and government incentives.
Checking current programs for your area...
No local rebates were found for this product.
Searched ZIP
Rebate details couldn't be loaded right now.
Free & fast shipping
30-day money-back guarantee
Free lifetime coverage
Transforme su juego de instalación con el kit de instalación DELLA
En DELLA, nos dedicamos a brindar a nuestros clientes soluciones flexibles que se adaptan a sus necesidades. Tanto si es un entusiasta práctico como si simplemente quiere evitar el coste de una instalación profesional, ¡nuestro kit de instalación DELLA es la opción perfecta!
Plan de alquiler:
Elige tu periodo de alquiler. Cada plan tiene una tarifa de alquiler más un depósito reembolsable de $200.
Alquiler de 7 días: $100 + depósito de $200
Alquiler de 15 días: $150 + depósito de $200
¿Por qué alquilar el kit de instalación DELLA?
Por solo $100 o $150 de alquiler más un depósito de $200 , puede alquilar el equipo necesario para su proyecto de instalación. Incluimos una etiqueta de devolución prepagada y, una vez devuelto el kit, le reembolsaremos el depósito. ¡Así de simple!
¿Qué incluye tu kit?
Bomba de vacío Orion Motor Tech (4,5 cfm, 1/3 hp): confiable y potente para satisfacer todas sus necesidades de vacío.
Medidor de vacío LCD CPS VG200: proporciona lecturas precisas para garantizar un rendimiento óptimo.
Manguera de refrigerante certificada al vacío de 6': diseñada para brindar durabilidad y un funcionamiento suave.
Appion MGAVCR: Herramienta de extracción de núcleo de válvula con clasificación de vacío MegaFlow con una conexión de sistema de 5/16".
Appion MGAVCT: Herramienta de extracción de núcleo de válvula con clasificación de vacío MegaFlow con una conexión de sistema de 1/4".
Botella de aceite para bombas de vacío: Ideal para rellenar bombas de vacío de paletas rotativas, HVAC y refrigeración. Apta tanto para uso profesional como para aficionados.
Llave dinamométrica ajustable (5–60 Nm, cabeza de 30 mm): esta llave dinamométrica ajustable es ideal para apretar con precisión las tuercas abocinadas durante la instalación de minisplit, lo que garantiza una conexión de línea de cobre segura y sin fugas.
¡Ahorra en grande! Comprar este equipo por separado le costaría más de $500. Con el kit de instalación DELLA, ahorra dinero y tiene la satisfacción de encargarse del proyecto usted mismo.
¿Listo para comenzar? No pierda la oportunidad de mejorar sus habilidades de instalación y ahorrar dinero. ¡Alquile hoy mismo el kit de instalación DELLA y dé el primer paso hacia una instalación sin complicaciones!
Shipping Policy
How Long Will It Take for My Order to Ship? It normally takes us 1 business day to arrange the shipment. During peak seasons, it will take 2-4 business days to arrange the shipment. We provide free ground shipping, so there are no additional charges for shipping and handling.
How Do I Track My Order? Log into YOUR ACCOUNT, and you may see each individual order that you’ve placed with us. Select one that you want and you’ll be provided with all the details you need about the order.
Once your order is on the way you will receive a notification email.
What Should I Do If I Haven’t Received My Order? Please contact us immediately.
For the full shipping policy, click here to view our shipping policy. Return
We offer return guarantees to ensure your satisfaction with every DELLA purchase.
DELLA provides comprehensive assistance for all orders within 30 days of purchase. If you're not satisfied with your product within 30 days of purchase from dellahome.com, you can return the product for a full refund.Products must be returned in their original operating condition, including all accessories and packaging.The customer is responsible for return shipping costs.
If a product defect is confirmed, DELLA will, at its discretion, provide the necessary replacement parts free of charge. DELLA will also cover all shipping expenses for the delivery of replacement parts.
Need to Start a Return? To initiate a return, call us at (800) 863-4143 or contact our live chat team.
For full return terms, click here to view our return policy.
Standard Warranty (1 Year): These products are covered by a 1-year limited warranty from the date of purchase. After 30 days, customers are responsible for the return shipping costs.
Puede alquilar fácilmente el kit de instalación DIY de DELLA pagando una tarifa de alquiler de $100 o $150 y un depósito de $200. Le proporcionaremos una etiqueta de devolución prepagada y, una vez recibido el kit devuelto, le reembolsaremos el depósito de $200 en su totalidad.
Asegúrese de devolver todos los componentes intactos y sin daños. Se aplicará un cargo adicional por los kits no devueltos. Asegúrese de utilizar la etiqueta de devolución prepagada proporcionada para evitar cargos innecesarios.
Si tiene algún problema durante la instalación, le recomendamos contactar con el servicio de atención al cliente. Haremos todo lo posible por ayudarle y guiarle.
Talk to an HVAC expert
Not sure which system is right for your home? Our experts can help with sizing, installation, and product selection.
Technical support: Mon - Fri, 8 AM - 3 PM (PST)
24/7 live chat for general question
I was needing a small ducted unit for a shipping container build. I have never installed a mini split before but very competent. I watched some videos and read instructions several times before the rental kit arrived. It went pretty smoothly I thought for my first time and so far the unit has been working good. My only complaint was the rental tools arrived late causing a delay in the job. I ordered on a Monday with expected delivery the following Monday. Well I did not receive it until Wednesday. I used it that day and return shipped it the next day. Had it maybe 24 hours. The description does not clarify if shipping times is included in the time rental. I believe the rental time should be based off of when it was received and not when it was ordered because it took 9 days before it arrived.
It was easy to use and came when expected. It was packed well, had instructions included and was easy to return when I was finished. There was some disappointment with the tools. The electronic gauge had no 9V battery and I wasn't expecting that or I would have made sure to have one on hand. I had to take one out of a smoke detector to use it. The red tubing bender for the 1/4" line was damaged in the middle as if someone had taken a razor knife and cut 3/4 of it away in a scooping cut leaving only a thin section holding it together. luckily I had my own on hand and used that instead. It could have been a disaster if that had broken off inside the copper line. I would have just bough my own complete pump and tool set but then I wouldn't qualify for the better warranty by using the rental set and in the end it did save me money renting. I would do it again if I install another.
The kit is a wonderful idea for DIY. Unfortunately, the sight glass on the pump I received was broken when I removed it from box. I didn’t realize it until I had a puddle of oil on my table. I had to go rent an automotive pump to replace it.
Other than the shipping mix up, great product.
The kit had everything you needed for the install. Even with the torque wrench, I would still start on the lower end of the recommended torque to prevent over tightening and go from there.
Della is a great company to work with. I purchased a 5 zone mini split with ceiling cassettes and took my time installing it according to the instructions and with the Della supplied rental kit. Whenever I had questions along the way Della representatives and technical support operators would either answer the call or if busy would call me back to assist. Once the install was done I was pleased with its quiet efficient operation. I highly recommend Della for their products and their support and im confident that should a problem arise, Della will be there to assist just as they have been through the DIY install.
The rental kit had all the correct tools needed to follow the installation instructions. The split unit works great and is a terrific upgrade to my garage.
The install was straight forward. This was my first mini split install. The directions were good and made it difficult to install wrong. The rental kit was a big help with tube inserts to prevent kinking the line set. I will change out the condensate drains for pvc.
Easy installation of evaporator and condenser. Worked out between 2 buildings allowing 16 ft ac lines to be installed without rolling up extra length of lines. Used vacuum pump rental and all went correctly. Cools great, and heater functions great.
I was very worried about leaks. After toquing the fittings and filled with trepidation, I opened the valves. It worked out fine and passed the soapy water test.
Hi, I am first time using that kind of tools. I think is easy handing I get the very good direction how use. So all installation is perfect. I like it.
Everything was brand new when I received my install kit, and it was very easy to complete my installation! I plan on keeping mine instead of returning it because I'm going to install another one! Great job Della!
If you are considering a DIY mini split I 100% recommend renting the DIY kit. I’ve never done a project like this and the DIY kit made this so much easier to complete.
Della Mini split with cassette was easy to install and the rental equipment was like new and worked very well. This is my first experience with Della and so far everything is working well. The instructions with the rental equipment could have a little more detail for the average homeowner. I am still giving 5 stars since all of the rental equipment worked so well.
The rental tools for the Della Mini split were really good - I could not have completed the install without them.
I did have a little trouble in that the adaptor for the vacuum line was attached to the vacuum pump inlet, which I did not notice until deciding I was missing a part and leaving the job for the day. After wracking my brain and closer examination, I found the adaptor and the install went very quickly the next day.
I do see in the picture that two vials of vacuum oil is the normal makeup of the kit. I only received one and it barely covered the minimum line on the pump.
The rental kit was beyond helpful!! The included instructions and technical videos made this a breeze (pun intended). Absolutely wonderful experience with Della I highly recommend them!! They even gave me a courtesy call before the rental period ended to make sure I didn’t have any issues or concerns.
This is my 4th Mini Split install. But by having the Della Install kit, this make the install much easier, Faster and increased confidence of the finished job. The included tubing bending kit made the tubing bends and chance of kinking the tubing non existant. The Vacuum pump was flawless, just add the included oil and ready to go.
Then the digital gauge. Much better the the regular analog gauge set I have. Turn the gauge on and it defaults to the correct range, Ready to start vacuuming.
This set also includes 2 sizes of too;s to properly remove the Scharder valve on the outside unit, this allows for a faster vacuuming of the system, The tool I have presses on the valve simialer to filling an auto tire, This slightly restricts (Vacuum) flow to the pump increasing vacuum time and chances of leaking during vacuuming and when removing fitting. This valve tool is a must. Best part of it all it's all furnished by Della For 7 days rental and return shipping is Prepaid. Mine went easy and great system works as expected. Then do it correctly and document everything and your install may include a Lifetime Della warrenty. Nuff Said .
Nice install kit but the kit was supplied with a dead battery on the micron gauge and not enough oil to fill the vacuum pump, requiring me to buy more pump oil and a 9v battery before I could use the kit
When we received the kit it was packed well and had everything I needed. After reviewing the instructions I went to work putting together the lines and torquing each end to the specifications in my Manual that came with the mini split. Then assembled the line tools to vacuum the lines with the supplied vacuum pump and valves with micron gage. After running the first time it was not going down on the gage so I used a vacuum line from my vacuum pump and tried again but still was not able to get below 700. So I switched to my pump and line with all of Della’s equipment and was able to achieve 340 mic for over 5 minutes. I the process of changing over the valves for the vacuum hold test it changed to 410 and maintained for over 5 minutes. Following the instructions I added a 5second charge on the high pressure side and purged the closed valve assembly from the gage and reinstalled the valve stem with the tool supplied and checked for leaks then opened both valves and checked one more time. I then turned on the power supply and started the heat pump .it works perfectly ! I shut the unit off and wrapped the lines and installed the line covers and strapped them in place.